ESP / Stability Control Light on a Acura NSX
Investigate soon. Driving short distances is generally okay, but book a diagnostic check.
What the ESP / Stability Control Light Means on a Acura NSX
The ESP / stability control light on a Acura NSX indicates the electronic stability program is either active (flashing) or has a fault/is switched off (steady). ESP helps prevent skids by braking individual wheels, so a steady light means that safety net may be unavailable.
How Urgent Is the ESP / Stability Control Light?
In terms of priority, treat this as a moderate concern on your Acura NSX. The single most useful thing you can observe is whether the ESP / Stability Control Light is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Acura NSX drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.
Common Symptoms Alongside the ESP / Stability Control Light
The ESP / Stability Control Light on your Acura NSX is one data point, and the symptoms around it are the rest of the story. Perhaps the engine feels different, a gauge reads unusually, or the car behaves normally but the symbol simply will not clear. Note everything you observe, because the pattern of symptoms on the Acura NSX is exactly what turns a vague warning into a specific, fixable diagnosis.
- Flashes during hard cornering or slippery conditions
- Steady light means ESP off or faulty
- Possible reduced cornering assistance
- May pair with ABS/traction lights
What Causes the ESP / Stability Control Light to Come On?
The ESP / Stability Control Light on the Acura NSX can be triggered by several conditions, and experienced technicians work through them from most to least likely. Some causes are trivial and cost almost nothing to correct, while others require replacing a sensor or component. The list below reflects what actually turns this light on in the real world, so you can gauge whether you are likely facing a quick fix or a workshop visit.
- ESP switched off manually
- Wheel speed sensor fault
- Steering angle sensor needs calibration
- Brake light switch fault
- ABS module fault
How to Fix the ESP / Stability Control Light on a Acura NSX
The right way to clear the ESP / Stability Control Light on a Acura NSX is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- Check the ESP off button has not been pressed
- Restart the car and drive a short distance
- Scan for stability-control codes
- Recalibrate the steering angle sensor if needed
- Repair the underlying sensor or switch fault
Is It Safe to Drive With the ESP / Stability Control Light On?
Whether it is safe to keep driving your Acura NSX with the ESP / Stability Control Light on comes down to urgency (moderate) and behaviour. As a rule, if the light is red or flashing, or the Acura NSX is running poorly, stop somewhere safe and arrange help rather than pushing on. If the light is amber and the car drives normally, you generally have time to reach a workshop — but 'have time' is not the same as 'ignore it', so book a check promptly.
Diagnostic Trouble Codes Linked to the ESP / Stability Control Light
If you scan a Acura NSX showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
C0035 |
Left Front Wheel Speed Sensor Circuit The ABS module has lost a valid signal from the left front wheel speed sensor. |
C0110 |
ABS Pump Motor Circuit Malfunction The ABS hydraulic pump motor circuit has failed, disabling anti-lock function. |
Professional Mechanic Tips
A faulty brake light switch is a sneaky cause of the ESP light on many cars — cheap to fix and easy to miss.
Frequently Asked Questions
Why is the ESP / Stability Control Light on in my Acura NSX?
The ESP / Stability Control Light illuminates on a Acura NSX when the vehicle detects a condition in the related system that is outside its normal range. The exact reason can vary from something as minor as a loose connection to a component that needs replacing, which is why reading the stored trouble codes is the reliable way to know for certain.
Can I keep driving with the ESP / Stability Control Light on?
It depends on the urgency (moderate) and how your Acura NSX is behaving. If the light is red or flashing, or the car drives differently, stop safely and get help. If it is amber and everything feels normal, you can usually drive to a workshop soon — just do not put off the diagnosis.
How much does it cost to fix the ESP / Stability Control Light on a Acura NSX?
Cost varies widely because the ESP / Stability Control Light can stem from several causes on a Acura NSX. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.
Will the ESP / Stability Control Light reset itself on a Acura NSX?
If the trigger was temporary, a Acura NSX may turn the ESP / Stability Control Light off automatically after a few drive cycles. If it remains lit, the vehicle is telling you the fault is still present, and the symbol will only go out for good once the cause is fixed.