Glow Plug Light (Diesel) on a Chery Tiggo 2
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Chery Tiggo 2
The glow-plug light on your diesel Chery Tiggo 2 is your cue to wait a couple of seconds before starting in cold weather. A flashing light after the engine is running, however, indicates a fault the ECU wants checked.
How Urgent Is the Glow Plug Light (Diesel)?
Urgency level for this indicator on the Chery Tiggo 2: low. Reading the colour is the fastest gut-check — a red symbol asks you to stop and investigate quickly, while amber or yellow means schedule a check soon rather than immediately. Green and blue symbols are simply telling you a system is active. Whatever the colour, the safest habit is to note when the Glow Plug Light (Diesel) appeared, how the Chery Tiggo 2 is behaving, and whether the light is steady or flashing, because a flashing warning almost always means act now.
Common Symptoms Alongside the Glow Plug Light (Diesel)
Alongside the Glow Plug Light (Diesel), Chery Tiggo 2 owners commonly report a handful of related signs. Some are obvious, others easy to miss until you pay attention. Keeping a short mental (or written) log of what the Chery Tiggo 2 does when the light is on gives whoever performs the repair a huge head start and can save you money on diagnostic time.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
Why did the Glow Plug Light (Diesel) come on in your Chery Tiggo 2? The honest answer is 'it depends', but the possibilities cluster into a recognisable set of causes. Knowing them in advance means you will not be caught off guard by a diagnosis, and it lets you sanity-check any repair quote against what commonly goes wrong on the Chery Tiggo 2.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Chery Tiggo 2
To resolve the Glow Plug Light (Diesel) on your Chery Tiggo 2, resist the urge to simply disconnect the battery and hope it stays off. A warning that is cleared without addressing the cause almost always returns. The step-by-step approach below is the same logical order a professional follows on the Chery Tiggo 2: confirm the basics, read the stored codes, then target the actual fault.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Whether it is safe to keep driving your Chery Tiggo 2 with the Glow Plug Light (Diesel) on comes down to urgency (low) and behaviour. As a rule, if the light is red or flashing, or the Chery Tiggo 2 is running poorly, stop somewhere safe and arrange help rather than pushing on. If the light is amber and the car drives normally, you generally have time to reach a workshop — but 'have time' is not the same as 'ignore it', so book a check promptly.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Chery Tiggo 2 showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Hard cold starts plus a flashing glow-plug light on a diesel Chery Tiggo 2 usually means one or more plugs have failed — replace them as a set for even starting.
Do not ignore a flashing glow light; on many diesels it doubles as a general engine fault warning, so scan it rather than guessing.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Chery Tiggo 2?
On a Chery Tiggo 2, the Glow Plug Light (Diesel) comes on because a monitored value crossed a threshold the car considers abnormal. It could be a simple, inexpensive cause or a genuine fault — the only way to be sure is to scan the vehicle and interpret the codes rather than guess from the symbol alone.
Can I keep driving with the Glow Plug Light (Diesel) on?
It depends on the urgency (low) and how your Chery Tiggo 2 is behaving. If the light is red or flashing, or the car drives differently, stop safely and get help. If it is amber and everything feels normal, you can usually drive to a workshop soon — just do not put off the diagnosis.
How much does it cost to fix the Glow Plug Light (Diesel) on a Chery Tiggo 2?
Cost varies widely because the Glow Plug Light (Diesel) can stem from several causes on a Chery Tiggo 2. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.
Will the Glow Plug Light (Diesel) reset itself on a Chery Tiggo 2?
Occasionally, yes — a Chery Tiggo 2 can extinguish the Glow Plug Light (Diesel) by itself when the monitored value returns to normal. But a light that keeps coming back is a clear sign of an unresolved issue that needs a proper diagnosis rather than repeated resets.