ABS Warning Light on a Chery Tiggo 8
Have this checked promptly. It is not an immediate stop, but do not ignore it for long.
What the ABS Warning Light Means on a Chery Tiggo 8
On the Chery Tiggo 8, an illuminated ABS symbol indicates the system found a fault — commonly a wheel speed sensor — and switched off ABS. You retain standard braking, but should have it checked so full safety function is restored.
How Urgent Is the ABS Warning Light?
In terms of priority, treat this as a high concern on your Chery Tiggo 8. The single most useful thing you can observe is whether the ABS Warning Light is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Chery Tiggo 8 drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.
Common Symptoms Alongside the ABS Warning Light
Alongside the ABS Warning Light, Chery Tiggo 8 owners commonly report a handful of related signs. Some are obvious, others easy to miss until you pay attention. Keeping a short mental (or written) log of what the Chery Tiggo 8 does when the light is on gives whoever performs the repair a huge head start and can save you money on diagnostic time.
- ABS light steady on the dash
- Anti-lock not engaging on hard stops
- Sometimes paired with the traction/ESP light
- Speedometer glitches (shared sensor)
What Causes the ABS Warning Light to Come On?
Why did the ABS Warning Light come on in your Chery Tiggo 8? The honest answer is 'it depends', but the possibilities cluster into a recognisable set of causes. Knowing them in advance means you will not be caught off guard by a diagnosis, and it lets you sanity-check any repair quote against what commonly goes wrong on the Chery Tiggo 8.
- Faulty wheel speed sensor
- Damaged sensor wiring or tone ring
- Low brake fluid
- ABS module or pump fault
- Blown fuse
How to Fix the ABS Warning Light on a Chery Tiggo 8
The right way to clear the ABS Warning Light on a Chery Tiggo 8 is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- Check the brake fluid level first
- Scan for ABS (C-series) trouble codes
- Inspect wheel speed sensors and wiring for damage
- Clean or replace the faulty sensor / tone ring
- Clear codes and road-test to confirm ABS returns
Is It Safe to Drive With the ABS Warning Light On?
Safe-to-drive depends on judgement, and here is the technician's version for a Chery Tiggo 8: respect the colour, respect the behaviour. Given this light's high urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.
Diagnostic Trouble Codes Linked to the ABS Warning Light
If you scan a Chery Tiggo 8 showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
C0035 |
Left Front Wheel Speed Sensor Circuit The ABS module has lost a valid signal from the left front wheel speed sensor. |
C0110 |
ABS Pump Motor Circuit Malfunction The ABS hydraulic pump motor circuit has failed, disabling anti-lock function. |
Professional Mechanic Tips
Remember you still have brakes; just leave extra stopping distance and avoid slamming the pedal until ABS is restored.
Corrosion on the sensor tip or tone ring is a common, cheap cause — worth cleaning before condemning the module.
Frequently Asked Questions
Why is the ABS Warning Light on in my Chery Tiggo 8?
Your Chery Tiggo 8 turned on the ABS Warning Light after its self-diagnostics flagged an issue in that system. Because several different faults can trigger the same symbol, the smart first move is an OBD-II scan to pull the specific code before you spend any money.
Can I keep driving with the ABS Warning Light on?
It depends on the urgency (high) and how your Chery Tiggo 8 is behaving. If the light is red or flashing, or the car drives differently, stop safely and get help. If it is amber and everything feels normal, you can usually drive to a workshop soon — just do not put off the diagnosis.
How much does it cost to fix the ABS Warning Light on a Chery Tiggo 8?
Cost varies widely because the ABS Warning Light can stem from several causes on a Chery Tiggo 8. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.
Will the ABS Warning Light reset itself on a Chery Tiggo 8?
If the trigger was temporary, a Chery Tiggo 8 may turn the ABS Warning Light off automatically after a few drive cycles. If it remains lit, the vehicle is telling you the fault is still present, and the symbol will only go out for good once the cause is fixed.