Glow Plug Light (Diesel) on a Chevrolet Cruze
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Chevrolet Cruze
The glow-plug light on your diesel Chevrolet Cruze is your cue to wait a couple of seconds before starting in cold weather. A flashing light after the engine is running, however, indicates a fault the ECU wants checked.
How Urgent Is the Glow Plug Light (Diesel)?
In terms of priority, treat this as a low concern on your Chevrolet Cruze. The single most useful thing you can observe is whether the Glow Plug Light (Diesel) is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Chevrolet Cruze drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.
Common Symptoms Alongside the Glow Plug Light (Diesel)
The Glow Plug Light (Diesel) on your Chevrolet Cruze is one data point, and the symptoms around it are the rest of the story. Perhaps the engine feels different, a gauge reads unusually, or the car behaves normally but the symbol simply will not clear. Note everything you observe, because the pattern of symptoms on the Chevrolet Cruze is exactly what turns a vague warning into a specific, fixable diagnosis.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
There is rarely a single universal reason the Glow Plug Light (Diesel) appears on a Chevrolet Cruze; instead there is a shortlist of usual suspects. Root causes range from simple, inexpensive items to genuine component failures, which is why a proper diagnosis always beats guessing. Understanding the common triggers on the Chevrolet Cruze helps you have a more informed conversation with your mechanic and avoid paying for parts you do not need.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Chevrolet Cruze
The right way to clear the Glow Plug Light (Diesel) on a Chevrolet Cruze is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Drivers ask this constantly, and the answer for the Chevrolet Cruze is nuanced. A steady amber Glow Plug Light (Diesel) with no change in how the car drives usually means you can continue carefully and get it looked at soon. A red or flashing Glow Plug Light (Diesel), unusual noises, warning messages, or a drop in performance are your cue to stop the Chevrolet Cruze safely and avoid further driving until the cause is known.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Chevrolet Cruze showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Hard cold starts plus a flashing glow-plug light on a diesel Chevrolet Cruze usually means one or more plugs have failed — replace them as a set for even starting.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Chevrolet Cruze?
The Glow Plug Light (Diesel) illuminates on a Chevrolet Cruze when the vehicle detects a condition in the related system that is outside its normal range. The exact reason can vary from something as minor as a loose connection to a component that needs replacing, which is why reading the stored trouble codes is the reliable way to know for certain.
Can I keep driving with the Glow Plug Light (Diesel) on?
For a Chevrolet Cruze, a steady amber Glow Plug Light (Diesel) with normal driving generally allows a careful trip to a garage. A red or flashing light, or any change in performance, means you should stop and avoid further driving until the fault is identified.
How much does it cost to fix the Glow Plug Light (Diesel) on a Chevrolet Cruze?
Repair cost for the Glow Plug Light (Diesel) on your Chevrolet Cruze depends entirely on the root cause. Because the same symbol covers cheap and expensive faults alike, a proper scan-based diagnosis is the best money you can spend — it turns a guess into a precise, fair quote.
Will the Glow Plug Light (Diesel) reset itself on a Chevrolet Cruze?
If the trigger was temporary, a Chevrolet Cruze may turn the Glow Plug Light (Diesel) off automatically after a few drive cycles. If it remains lit, the vehicle is telling you the fault is still present, and the symbol will only go out for good once the cause is fixed.