ABS Warning Light on a Infiniti Q60
Have this checked promptly. It is not an immediate stop, but do not ignore it for long.
What the ABS Warning Light Means on a Infiniti Q60
On the Infiniti Q60, an illuminated ABS symbol indicates the system found a fault — commonly a wheel speed sensor — and switched off ABS. You retain standard braking, but should have it checked so full safety function is restored.
How Urgent Is the ABS Warning Light?
Urgency level for this indicator on the Infiniti Q60: high. Reading the colour is the fastest gut-check — a red symbol asks you to stop and investigate quickly, while amber or yellow means schedule a check soon rather than immediately. Green and blue symbols are simply telling you a system is active. Whatever the colour, the safest habit is to note when the ABS Warning Light appeared, how the Infiniti Q60 is behaving, and whether the light is steady or flashing, because a flashing warning almost always means act now.
Common Symptoms Alongside the ABS Warning Light
The ABS Warning Light on your Infiniti Q60 is one data point, and the symptoms around it are the rest of the story. Perhaps the engine feels different, a gauge reads unusually, or the car behaves normally but the symbol simply will not clear. Note everything you observe, because the pattern of symptoms on the Infiniti Q60 is exactly what turns a vague warning into a specific, fixable diagnosis.
- ABS light steady on the dash
- Anti-lock not engaging on hard stops
- Sometimes paired with the traction/ESP light
- Speedometer glitches (shared sensor)
What Causes the ABS Warning Light to Come On?
There is rarely a single universal reason the ABS Warning Light appears on a Infiniti Q60; instead there is a shortlist of usual suspects. Root causes range from simple, inexpensive items to genuine component failures, which is why a proper diagnosis always beats guessing. Understanding the common triggers on the Infiniti Q60 helps you have a more informed conversation with your mechanic and avoid paying for parts you do not need.
- Faulty wheel speed sensor
- Damaged sensor wiring or tone ring
- Low brake fluid
- ABS module or pump fault
- Blown fuse
How to Fix the ABS Warning Light on a Infiniti Q60
The right way to clear the ABS Warning Light on a Infiniti Q60 is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- Check the brake fluid level first
- Scan for ABS (C-series) trouble codes
- Inspect wheel speed sensors and wiring for damage
- Clean or replace the faulty sensor / tone ring
- Clear codes and road-test to confirm ABS returns
Is It Safe to Drive With the ABS Warning Light On?
Safe-to-drive depends on judgement, and here is the technician's version for a Infiniti Q60: respect the colour, respect the behaviour. Given this light's high urgency, treat any red or flashing warning as a stop-now signal. If everything feels normal and the light is amber, a short, cautious drive to a garage is typically fine, provided you do not delay the actual diagnosis.
Diagnostic Trouble Codes Linked to the ABS Warning Light
If you scan a Infiniti Q60 showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
C0035 |
Left Front Wheel Speed Sensor Circuit The ABS module has lost a valid signal from the left front wheel speed sensor. |
C0110 |
ABS Pump Motor Circuit Malfunction The ABS hydraulic pump motor circuit has failed, disabling anti-lock function. |
Professional Mechanic Tips
On a Infiniti Q60, the ABS and traction lights often come on together from a single wheel speed sensor — fix the sensor and both usually clear.
Remember you still have brakes; just leave extra stopping distance and avoid slamming the pedal until ABS is restored.
Frequently Asked Questions
Why is the ABS Warning Light on in my Infiniti Q60?
The ABS Warning Light illuminates on a Infiniti Q60 when the vehicle detects a condition in the related system that is outside its normal range. The exact reason can vary from something as minor as a loose connection to a component that needs replacing, which is why reading the stored trouble codes is the reliable way to know for certain.
Can I keep driving with the ABS Warning Light on?
For a Infiniti Q60, a steady amber ABS Warning Light with normal driving generally allows a careful trip to a garage. A red or flashing light, or any change in performance, means you should stop and avoid further driving until the fault is identified.
How much does it cost to fix the ABS Warning Light on a Infiniti Q60?
Cost varies widely because the ABS Warning Light can stem from several causes on a Infiniti Q60. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.
Will the ABS Warning Light reset itself on a Infiniti Q60?
If the trigger was temporary, a Infiniti Q60 may turn the ABS Warning Light off automatically after a few drive cycles. If it remains lit, the vehicle is telling you the fault is still present, and the symbol will only go out for good once the cause is fixed.