High Beam Indicator on a Subaru BRZ
This is usually informational. Address it at your convenience.
What the High Beam Indicator Means on a Subaru BRZ
On the Subaru BRZ, this blue symbol lights whenever high beams (or auto high beam) are active. Dip them for approaching cars and when following another vehicle.
How Urgent Is the High Beam Indicator?
In terms of priority, treat this as a low concern on your Subaru BRZ. The single most useful thing you can observe is whether the High Beam Indicator is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Subaru BRZ drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.
Common Symptoms Alongside the High Beam Indicator
The High Beam Indicator on your Subaru BRZ is one data point, and the symptoms around it are the rest of the story. Perhaps the engine feels different, a gauge reads unusually, or the car behaves normally but the symbol simply will not clear. Note everything you observe, because the pattern of symptoms on the Subaru BRZ is exactly what turns a vague warning into a specific, fixable diagnosis.
- Blue high-beam symbol lit
- Tracks the headlight stalk / auto high beam
- No fault behaviour
What Causes the High Beam Indicator to Come On?
There is rarely a single universal reason the High Beam Indicator appears on a Subaru BRZ; instead there is a shortlist of usual suspects. Root causes range from simple, inexpensive items to genuine component failures, which is why a proper diagnosis always beats guessing. Understanding the common triggers on the Subaru BRZ helps you have a more informed conversation with your mechanic and avoid paying for parts you do not need.
- High beams switched on (normal)
- Automatic high beam engaged
How to Fix the High Beam Indicator on a Subaru BRZ
The right way to clear the High Beam Indicator on a Subaru BRZ is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- Dip the headlights for oncoming or leading traffic
- Confirm the indicator matches the stalk position
- If using auto high beam, ensure the camera/sensor is unobstructed
- Replace a blown main-beam bulb if one side is dark
Is It Safe to Drive With the High Beam Indicator On?
Whether it is safe to keep driving your Subaru BRZ with the High Beam Indicator on comes down to urgency (low) and behaviour. As a rule, if the light is red or flashing, or the Subaru BRZ is running poorly, stop somewhere safe and arrange help rather than pushing on. If the light is amber and the car drives normally, you generally have time to reach a workshop — but 'have time' is not the same as 'ignore it', so book a check promptly.
Professional Mechanic Tips
If the blue light is on in town traffic on a Subaru BRZ, you have full beam engaged — dip it to avoid dazzling everyone ahead.
Frequently Asked Questions
Why is the High Beam Indicator on in my Subaru BRZ?
Your Subaru BRZ turned on the High Beam Indicator after its self-diagnostics flagged an issue in that system. Because several different faults can trigger the same symbol, the smart first move is an OBD-II scan to pull the specific code before you spend any money.
Can I keep driving with the High Beam Indicator on?
Short answer: sometimes, but not indefinitely. Given this indicator's low priority, respect the warning colour and the car's behaviour. When in doubt with your Subaru BRZ, the safe choice is to stop and have it checked rather than risk further damage.
How much does it cost to fix the High Beam Indicator on a Subaru BRZ?
Cost varies widely because the High Beam Indicator can stem from several causes on a Subaru BRZ. Some fixes are almost free — tightening a cap or a connector — while others involve a sensor or component and its labour. Getting the specific trouble code first is what lets a shop quote accurately instead of estimating blind.
Will the High Beam Indicator reset itself on a Subaru BRZ?
Sometimes the High Beam Indicator on a Subaru BRZ clears on its own once the condition that triggered it no longer exists — for example after several good drive cycles. More often, though, the light stays on until the underlying fault is repaired and the code is cleared, so treat a self-clearing light as a reason to still investigate.