Glow Plug Light (Diesel) on a Toyota Mirai
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Toyota Mirai
On a diesel Toyota Mirai, the coiled glow-plug light is normal at start-up: it shows the glow plugs are pre-heating the cylinders. You wait for it to go out before cranking. If it flashes after warm-up, it signals a glow-plug or engine management fault.
How Urgent Is the Glow Plug Light (Diesel)?
In terms of priority, treat this as a low concern on your Toyota Mirai. The single most useful thing you can observe is whether the Glow Plug Light (Diesel) is steady or blinking: a steady light generally allows a careful drive to a safe location or a workshop, whereas a flashing light signals an active fault that can cause damage if you continue. Pay attention to changes in how the Toyota Mirai drives, sounds, or smells, since those symptoms sharpen the diagnosis considerably.
Common Symptoms Alongside the Glow Plug Light (Diesel)
Alongside the Glow Plug Light (Diesel), Toyota Mirai owners commonly report a handful of related signs. Some are obvious, others easy to miss until you pay attention. Keeping a short mental (or written) log of what the Toyota Mirai does when the light is on gives whoever performs the repair a huge head start and can save you money on diagnostic time.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
Why did the Glow Plug Light (Diesel) come on in your Toyota Mirai? The honest answer is 'it depends', but the possibilities cluster into a recognisable set of causes. Knowing them in advance means you will not be caught off guard by a diagnosis, and it lets you sanity-check any repair quote against what commonly goes wrong on the Toyota Mirai.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Toyota Mirai
The right way to clear the Glow Plug Light (Diesel) on a Toyota Mirai is to fix the underlying cause, not just reset the symbol. Work through the steps below in order — they move from the simplest checks any driver can do to the diagnostic work best left to a scan tool. Following this sequence prevents the classic mistake of replacing expensive parts before ruling out the cheap, common problems first.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Whether it is safe to keep driving your Toyota Mirai with the Glow Plug Light (Diesel) on comes down to urgency (low) and behaviour. As a rule, if the light is red or flashing, or the Toyota Mirai is running poorly, stop somewhere safe and arrange help rather than pushing on. If the light is amber and the car drives normally, you generally have time to reach a workshop — but 'have time' is not the same as 'ignore it', so book a check promptly.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Toyota Mirai showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Hard cold starts plus a flashing glow-plug light on a diesel Toyota Mirai usually means one or more plugs have failed — replace them as a set for even starting.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Toyota Mirai?
The Glow Plug Light (Diesel) illuminates on a Toyota Mirai when the vehicle detects a condition in the related system that is outside its normal range. The exact reason can vary from something as minor as a loose connection to a component that needs replacing, which is why reading the stored trouble codes is the reliable way to know for certain.
Can I keep driving with the Glow Plug Light (Diesel) on?
For a Toyota Mirai, a steady amber Glow Plug Light (Diesel) with normal driving generally allows a careful trip to a garage. A red or flashing light, or any change in performance, means you should stop and avoid further driving until the fault is identified.
How much does it cost to fix the Glow Plug Light (Diesel) on a Toyota Mirai?
There is no single price for the Glow Plug Light (Diesel) on a Toyota Mirai; it ranges from a no-cost adjustment to a component replacement. The honest way to control cost is to diagnose the exact code before authorising any repair, so you only pay to fix what is actually wrong.
Will the Glow Plug Light (Diesel) reset itself on a Toyota Mirai?
Occasionally, yes — a Toyota Mirai can extinguish the Glow Plug Light (Diesel) by itself when the monitored value returns to normal. But a light that keeps coming back is a clear sign of an unresolved issue that needs a proper diagnosis rather than repeated resets.