Glow Plug Light (Diesel) on a Mitsubishi ASX
This is usually informational. Address it at your convenience.
What the Glow Plug Light (Diesel) Means on a Mitsubishi ASX
The glow-plug light on your diesel Mitsubishi ASX is your cue to wait a couple of seconds before starting in cold weather. A flashing light after the engine is running, however, indicates a fault the ECU wants checked.
How Urgent Is the Glow Plug Light (Diesel)?
Urgency level for this indicator on the Mitsubishi ASX: low. Reading the colour is the fastest gut-check — a red symbol asks you to stop and investigate quickly, while amber or yellow means schedule a check soon rather than immediately. Green and blue symbols are simply telling you a system is active. Whatever the colour, the safest habit is to note when the Glow Plug Light (Diesel) appeared, how the Mitsubishi ASX is behaving, and whether the light is steady or flashing, because a flashing warning almost always means act now.
Common Symptoms Alongside the Glow Plug Light (Diesel)
The Glow Plug Light (Diesel) on your Mitsubishi ASX is one data point, and the symptoms around it are the rest of the story. Perhaps the engine feels different, a gauge reads unusually, or the car behaves normally but the symbol simply will not clear. Note everything you observe, because the pattern of symptoms on the Mitsubishi ASX is exactly what turns a vague warning into a specific, fixable diagnosis.
- Light on briefly at cold start (normal)
- Flashing light after warm-up (fault)
- Hard starting when cold
- Rough running or white smoke on cold mornings
What Causes the Glow Plug Light (Diesel) to Come On?
There is rarely a single universal reason the Glow Plug Light (Diesel) appears on a Mitsubishi ASX; instead there is a shortlist of usual suspects. Root causes range from simple, inexpensive items to genuine component failures, which is why a proper diagnosis always beats guessing. Understanding the common triggers on the Mitsubishi ASX helps you have a more informed conversation with your mechanic and avoid paying for parts you do not need.
- Normal pre-heat cycle (steady, brief)
- One or more failed glow plugs
- Glow plug relay fault
- Crankshaft/camshaft sensor issue
- Related engine management fault
How to Fix the Glow Plug Light (Diesel) on a Mitsubishi ASX
Fixing the Glow Plug Light (Diesel) on a Mitsubishi ASX is methodical, not mysterious. Start with the quick, no-cost checks, then let the vehicle's own trouble codes guide you toward the specific system at fault. The ordered steps here are designed so that by the time you (or your technician) reach the more involved work, you have already eliminated the easy explanations.
- At cold start, wait for the light to go out before cranking
- If it flashes, scan for glow-plug and engine codes
- Test each glow plug for resistance/continuity
- Replace failed plugs (ideally as a set) and check the relay
- Clear codes and confirm easy cold starts
Is It Safe to Drive With the Glow Plug Light (Diesel) On?
Drivers ask this constantly, and the answer for the Mitsubishi ASX is nuanced. A steady amber Glow Plug Light (Diesel) with no change in how the car drives usually means you can continue carefully and get it looked at soon. A red or flashing Glow Plug Light (Diesel), unusual noises, warning messages, or a drop in performance are your cue to stop the Mitsubishi ASX safely and avoid further driving until the cause is known.
Diagnostic Trouble Codes Linked to the Glow Plug Light (Diesel)
If you scan a Mitsubishi ASX showing this light, these are the OBD-II trouble codes most commonly associated with it. The code you actually retrieve is what pinpoints the repair.
| Code | Meaning |
|---|---|
P0335 |
Crankshaft Position Sensor Circuit The crankshaft position sensor signal is faulty, which can cause stalling or a no-start condition. |
Professional Mechanic Tips
Hard cold starts plus a flashing glow-plug light on a diesel Mitsubishi ASX usually means one or more plugs have failed — replace them as a set for even starting.
Frequently Asked Questions
Why is the Glow Plug Light (Diesel) on in my Mitsubishi ASX?
The Glow Plug Light (Diesel) illuminates on a Mitsubishi ASX when the vehicle detects a condition in the related system that is outside its normal range. The exact reason can vary from something as minor as a loose connection to a component that needs replacing, which is why reading the stored trouble codes is the reliable way to know for certain.
Can I keep driving with the Glow Plug Light (Diesel) on?
It depends on the urgency (low) and how your Mitsubishi ASX is behaving. If the light is red or flashing, or the car drives differently, stop safely and get help. If it is amber and everything feels normal, you can usually drive to a workshop soon — just do not put off the diagnosis.
How much does it cost to fix the Glow Plug Light (Diesel) on a Mitsubishi ASX?
Repair cost for the Glow Plug Light (Diesel) on your Mitsubishi ASX depends entirely on the root cause. Because the same symbol covers cheap and expensive faults alike, a proper scan-based diagnosis is the best money you can spend — it turns a guess into a precise, fair quote.
Will the Glow Plug Light (Diesel) reset itself on a Mitsubishi ASX?
Occasionally, yes — a Mitsubishi ASX can extinguish the Glow Plug Light (Diesel) by itself when the monitored value returns to normal. But a light that keeps coming back is a clear sign of an unresolved issue that needs a proper diagnosis rather than repeated resets.